Certified Phone Solutions Facebook


CPS Mailing List
Sales Promotions
Monthly Specials
Enter Email
:




We Proudly Accept

We Accept



Merchant Services


You are here: Home > Aiphone > Aiphone > Audio Intercoms > NHX Series
0 Items Found
NHX Central Control Unit NHX Duty Stations NHX Master Stations
NHX Options & Accessories NHX Sub Stations

Features

  • One master and up to 80 patient stations
  • Single and dual patient stations
  • Multi-station capability per patient room
  • Three types of call-ins from patient stations: routine call, bathroom call and cord-out trouble call, identified by tone and a blinking LED (with priority according to urgency and time of call)
  • NHR-3TS common area call station is used for common areas
  • Duty station for call annunciation in separate area
  • Optional zone light (max. 4)

Specifications

NHX-80X
Power Source
Use PS-2420UL x 2
Calling
Routine call, urgent bathroom call and cord-out trouble call (up to 5 calls can be displayed on the NHX-50M)
Communication
Single and private talk channel, press-to-talk or handset voice-actuation
Call-in Priority
1) Cord-out trouble call, 2) urgent bathroom call and NHR-3TS common area bathroom or staff call, 3) routine call, sub station call-ins on standby connected according to urgency level and time of call
Warning Tones
1) Line-off trouble at bedside or NHR-3TS and duty station (to stop tone on duty station, plug in 2-pin jumper to CN104 in CCU), 2) 90 sec. elapse timer: call tone goes up to HIGH level, 3) 90 sec. off-hook timer: steady tone will notify that handset is off-hook
Distance
Subs to CCU: 165’(22AWG) - Duty station to CCU: 65’(22AWG) - CCU to master: 65’(22AWG)
Wire Type
Sub/Duty station to CCU: Aiphone #862208 - CCU to master: Aiphone #862210
NHX-50M
Power Source
Powered by CCU (NHX-80X)
Wiring
10-pin plug-in connector (to NHX-80X), provided with preset volume controls, can verify connection of all sub stations
Distance
CCU to master: 65’(22AWG)
Wire Type
CCU to master: Aiphone #862210
NHX Substations
Power Source
Use PS-2420UL x 2
Power Source
Powered by CCU (NHX-80X)
Wiring
NH-1SA/A and NH-2SA/A: Subs 1~10 setting on SW1, CN1 (6 pin) to sub trunk line, CN2 (8 pin) for NHR-7A, NHR-4A and zone light, NHR-SP: CN1 (6 pin) to NHX-80X (when NHR-SP is installed, unplug connector from CN104 on NHX-80X)
Distance
Subs to CCU: 165’(22AWG) - Duty station to CCU: 65’(22AWG)
Wire Type
Sub/Duty station to CCU: Aiphone #862208

Product Literature